- Relieve your pain by using the TENS Mode.
- TENS is a non-invasive, drug free method to control your pain by sending tiny electrical impulses through the skin. In many cases, this stimulation will greatly reduce or eliminate pain.
- Strengthen your muscles by using the EMS Mode.
- EMS is widely used in hospitals and sports clinics to treat muscle injuries, to re-educate paralyzed muscles, and to prevent atrophy in affected muscles.
Product Features & Specifications:
- Simple-to-operate, portable electrotherapy device for pain management
- Unit combines TENS & EMS therapy for optimal treatment
- Channels: Dual Channel
- Pulse Amplitude: Adjustable, 0-105 mA
- Voltage: Constant Current, 100-240V (AC Adapter)
- Pulse Rate: Adjustable, from 1 to 150 Hz
- Pulse Width: Adjustable, from 50 to 300 microseconds, 10µS/step
- Wave Form:
- TENS: Mono-phasic Square Pulse
- EMS: Mono-phasic Square Pulse
- Power Source: 1x 9-volt Battery, or Free A/C Power Adapter included for home use.
- Timer: Adjustable in 1-minute increments between 1 and 60 minutes or Continuous. Treatment time counts down automatically.
- Dimensions: 4.5" x 2.55" x 0.9"
- Weight: 0.28 lb with battery
- 1 Year Manufacturer Warranty
- Package includes everything needed to start using the device right away:
- Twin Stim III unit
- 45" Lead Wires
- 1x package of 4x high quality Self-Adhesive Electrodes
- 1x 9V Battery
- A/C Power Adapter
- Hard Plastic Carrying Case
-
Instruction Booklet
Electrotherapy Programs:
- 4 TENS Modes:
- Burst
- Burst Rate adjustable from 0.5 - 5Hz, pulse width from 50-300µS, frequency fixed at 10Hz
- Normal
- Continuous stimulation with adjustable pulse rate & width
- Pulse Width Modulation Mode (Modulation 1)
- Pulse width decreases to 60% in one cycle, and increases back to original value in following cycle.
- Pulse rate, pulse width, and cycle time are adjustable.
- Pulse Rate Modulation Mode (Modulation 2)
- Pulse Rate decreases to 60% in one cycle, and increases back to original value in following cycle.
- Pulse rate, pulse width, and cycle time are adjustable.
- EMS Mode Specs
- Ramp Time:
- Adjustable from 1-6 seconds.
- Determines the time to reach set output level from zero, and from set output level to zero.
- On / Off Time:
- On time controls contraction time, adjustable from 1-60 seconds.
- Off time controls relaxation time, adjustable from 0-60 seconds.
- 3 EMS Modes:
- Synchronous (S)
- Synchronized stimulation of 2 channels.
- Ramp duration, ramp up, ramp down, pulse rate, & pulse width are all adjustable.
- Asynchronous/Alternate (A)
- As per Synchronous Mode except that stimulation of Channel 2 occurs when contraction of Channel 1 is complete.
- Delay (D)
- As per Synchronous Mode except that stimulation of Channel 2 begins after adjustable delay after Channel 1 stimulation begins.

Thank you for reaching out to LSI International! We're here to assist you with any questions, concerns, or feedback you may have. You can contact us directly using the information provided below, or simply fill out our contact form for a prompt response.
Direct Contact Information:
- Phone: (800)-832-0053
- Email: sales@lsiinternational.com
- Address: LSI International, 1131 N Warson Rd Bldg D St. Louis, MO 63132, United States
Your feedback and inquiries are important to us. We strive to respond to all messages as swiftly as possible. Thank you for choosing LSI International, and we look forward to assisting you!